Use this guide to set up a new property to send text messages (SMS) from RMS with your business name as the sender, in the order that gets it working soonest.
What is an SMS Sender ID?
An Alphanumeric Sender ID is a business name of up to 11 characters that guests see as the sender of your text messages (SMS), in place of a phone number. In RMS you enter it in the SMS From Name field for the property. Properties use a Sender ID so guests can recognise who a booking confirmation or reminder is from at a glance. A Sender ID is a setting of the 2-Way SMS module, so every property starts by activating that module.
Setting up an SMS Sender ID for a new property takes up to three phases: activate the 2-Way SMS module, register the Sender ID if your country requires it, then enter the Sender ID in RMS. Australian properties must register first, which usually takes 1 to 2 weeks. United Kingdom properties can enter the Sender ID straight after activating the module.
This guide is for System Administrators and users with the Manager Profile, who can open the Module Market by default. Other users need Module Market access in their Security Profile to activate the module, and access to Setup > Property Options > Property Information to enter the Sender ID.
Please Note! RMS is highly configurable. Some Terminology, User Access & Permissions, Images, Labels, and Functions used in these articles may differ from your setup. For more information, see Understanding RMS Help Centre Articles.
Which countries can use an SMS Sender ID
Whether a property can use an SMS Sender ID, and whether it must register the Sender ID first, depends on the country the property operates in. The table below shows the rules for each country.
| Country | Sender ID allowed? | Before you enter the Sender ID in RMS |
|---|---|---|
| Australia | Yes | Register it with the Australian Communications and Media Authority (ACMA). RMS lodges the registration for you. Confirmation usually takes 1 to 2 weeks. |
| United Kingdom | Yes | Nothing. There is no upfront registration on most networks. |
| United States, Canada and Mexico | No | Not applicable. Properties send SMS from a toll-free number that the mobile carriers verify. |
| Any other country | Not confirmed | Contact RMS Support before you set a Sender ID. |
For the full rules in each country, see Alphanumeric Sender ID for 2-Way SMS.
How the SMS Sender ID setup for a new property is organised
The SMS Sender ID setup runs in three phases, and each phase depends on the one before it. Phase 2 applies to Australian properties only.
| Phase 1: Activate 2-Way SMS |
| Phase 2: Register the Sender ID (Australia) |
| Phase 3: Enter the Sender ID in RMS |
The property can send SMS from its virtual mobile number as soon as Phase 1 is complete, so guests receive messages while an Australian registration is in progress.
Before you set up an SMS Sender ID
Most delays in setting up an SMS Sender ID come from a Sender ID or business details that fail the registration checks. Have the following ready before you start.
- A Sender ID that meets every rule: 3 to 11 characters, at least one letter, Latin/ASCII characters only, only letters, numbers and the symbols + - & _, no spaces, does not start or end with an underscore, no generic terms such as SMS, INFO or OTP, and closely matches your business name, brand, trademark or website domain.
- Australian properties: your Australian Business Number (ABN), your business name exactly as shown on the Australian Business Register (ABR) for that ABN, your company website, and the name and email address of an Authorised Representative who holds authority for that entity on the ABR. Check these on ABN Lookup.
- Your RMS Client ID, which the Australian registration form asks for.
Tip! The 11-character limit is tight, so a long property name needs shortening. "Ocean View Resort Torquay" will not pass, but "OceanView" will. Remove spaces rather than cutting a word in half, and keep the part of the name a guest would recognise.
Phase 1: Activate the 2-Way SMS module
The 2-Way SMS module sends SMS from RMS, so a property activates it before it can use a Sender ID. Activate the module in the Module Market:
In the side menu of RMS, go to Module Market.
- Select the Property.
- Select the Communications Module Type.
- Select the Activate toggle on the 2-Way SMS module.
- Read the Terms & Conditions.
- On an Enterprise database, choose Select Properties, highlight the property, select the Allocate icon, then select Apply/Exit.
- Select Activate 2-Way SMS.
RMS assigns a virtual mobile number to the property. To see the number, go to Setup > Property Options > Property Information, edit the property and open the Features tab: the number appears in the 2 Way SMS No field. Once the number appears, the property can send SMS, and guest replies arrive in the Message Centre.
Australian and United Kingdom properties receive the virtual mobile number automatically. Properties outside Australia, the United Kingdom and North America contact RMS Support after activating the module so RMS can set up the number. For the full activation steps, see 2-Way SMS module: Setup & Configuration.
Phase 2: Register your SMS Sender ID with ACMA (Australia only)
From 1 July 2026, ACMA requires every business name used as an SMS sender in Australia to be on its SMS Sender ID Register. You do not lodge the registration with ACMA yourself: RMS submits it on your behalf, and your Authorised Representative approves it with ACMA. United Kingdom properties skip this phase.
- Confirm your Sender ID meets every rule listed in Before you set up an SMS Sender ID.
- Confirm your business name, ABN and website on ABN Lookup, and correct any difference with the ABR first.
- Complete the RMS Sender ID registration form and submit it. RMS submits the registration to ACMA through its message provider.
- Your Authorised Representative watches for an email from ACMA, then verifies and approves the registration through the ACMA Assist portal.
Allow 1 to 2 weeks from submitting the form for ACMA to confirm the registration with your Authorised Representative. Once ACMA confirms it, continue to Phase 3. For the full registration guide, including the common reasons a registration is rejected, see Register your SMS Sender ID with ACMA (Australia).
Please Note! There is no bulk registration. Each property registers individually, including properties in an Enterprise group. RMS cannot register the same Sender ID more than once against the same ABN, so properties that share an ABN each need their own Sender ID.
Phase 3: Enter your Sender ID in the SMS From Name field
The SMS From Name field on the property's Features tab is where you enter the Sender ID in RMS. Australian properties wait for ACMA to confirm the registration first; United Kingdom properties can enter it once 2-Way SMS is active.
Important! In Australia, SMS sent with an unregistered Sender ID are labelled "Unverified" instead of your business name, and guests' phones group them with other unverified and suspected scam messages. Enter the Sender ID only after ACMA confirms the registration.
In the side menu of RMS, go to Setup > Property Options > Property Information.
- Select Edit on the property.
- Select the Features tab.
- Enter your Sender ID in the SMS From Name field. RMS shows a reminder beside the field that using a name prevents customers from replying to your SMS.
- Select Save/Exit.
RMS saves the Sender ID, and outbound SMS for the property now show your business name as the sender. This includes SMS sent from the Correspondence tab, In/Out Movements and Triggered Correspondence.
Please Note! Guests cannot reply to a business name, so a Sender ID makes the property's SMS one-way. The SMS From Name field applies to every SMS the property sends. To receive guest replies again, clear the field and select Save/Exit, and RMS sends from the virtual mobile number.
How to check your SMS Sender ID is working
To check the SMS Sender ID is working, send an SMS to a mobile number whose messages you can read, in the same country as the property. For example, send it from the Correspondence tab of a test reservation whose Guest Profile carries your mobile number. The message should show your Sender ID as the sender.
- The sender shows "Unverified" (Australia): the ACMA registration is not confirmed yet. The message is still delivered. Check with your Authorised Representative that they approved the registration in the ACMA Assist portal.
- The sender shows the virtual mobile number: the SMS From Name field is empty or was not saved. Repeat Phase 3.
To review every SMS the property has sent, use the SMS History report.
How to avoid delays when setting up an SMS Sender ID
These are the most common reasons an SMS Sender ID setup takes longer than it should, and how to avoid each one.
- The Sender ID is too long or contains a space: shorten it to 11 characters or fewer and remove every space before you submit the form.
- The business name does not match the ABR: copy the business name exactly as ABN Lookup shows it for the ABN you supply. Do not abbreviate or shorten it.
- The website belongs to a different entity: supply the website registered to the same legal entity as the ABN.
- The Authorised Representative cannot approve: nominate a person who holds authority for the entity on the ABR and whose contact details there are current.
- The Sender ID was entered before registration: guests in Australia see "Unverified". Leave the SMS From Name field empty until ACMA confirms, and send from the virtual mobile number meanwhile.
Related Articles
- 2-Way SMS module: Setup & Configuration
- Alphanumeric Sender ID for 2-Way SMS
- Register your SMS Sender ID with ACMA (Australia)
- Create an SMS template
- Activate or deactivate modules in Module Market
- SMS History report
Comments
0 comments
Please sign in to leave a comment.