Use this article to find out why a Discount or promo code is missing, takes nothing off, or takes off a different amount than expected, and how to fix each cause.
Overview
A Discount reduces a reservation's rate only when the Discount, the Rate Type, the Rate Period and the stay all allow it. When one of them does not, RMS leaves the Discount out of the list, clears the Discount field or takes nothing off, often with no message.
Applies to: Discounts on the Reservation screen, and promo codes on the RMS Booking Engine. The fixes need access to Setup > Accounting > Discounts and to the Rate Manager (Charts > Rate Manager).
Please Note! RMS is highly configurable. Some Terminology, User Access & Permissions, Images, Labels, and Functions used in these articles may differ from your setup. For more information, see Understanding RMS Help Centre Articles.
Which cause matches what you see?
The table below lists what users usually see and the cause to check first.
| What you see | Check first |
|---|---|
| "Sorry The Selected Discount Is Not Allowed With This Rate Type", and the Discount takes off 0.00. | Cause 1 |
| The Discount field clears when you select a Rate Type. | Cause 2 |
| You cannot select a Discount for the dates, or the Discount takes nothing off some nights. | Cause 3 |
| One Discount is missing from the list for a short stay. | Cause 4 |
| Some users can select the Discount and others cannot. | Cause 5 |
| A Discount linked to a Rate Type no longer applies. | Cause 6 |
| The Discount applies, but the amount is not what you expected. | Cause 7 |
| A guest's promo code does not work on the RMS Booking Engine. | Promo codes on the RMS Booking Engine |
Possible Causes
Cause 1: The Discount's Validation Options exclude the Rate Type
A Discount's Validation Options set the dates, Rate Types, arrival days, days of the week and channels it applies to. If you select a Discount that excludes the reservation's Rate Type, RMS shows "Sorry The Selected Discount Is Not Allowed With This Rate Type". After you select Ok, the Discount stays in the Discount field but takes off 0.00. This is why one Discount can work on one Rate Type and not on another.
Fix:
- Go to Setup > Accounting > Discounts and select Edit on the Discount.
- Navigate to the Validation Options tab and check which Rate Types are ticked for the stay dates.
- Open the entry that covers the stay dates, tick the Rate Type if the Discount should apply to it, then select Save/Exit.
Select the Discount on the reservation again, and it takes off the expected amount. If the Rate Type should stay excluded, use a Discount that allows it. See Prevent Discounts from Selected Rate Types.
Cause 2: The Rate Type does not allow discounts
When No Discount Allowed is selected on a Rate Type, a reservation on it cannot have a Discount. Selecting the Rate Type clears any Discount already on the reservation, with no message, and the list of Discounts is empty. Properties often set this on purpose for promotional or contracted rates, to prevent a double discount.
Fix:
- Go to Charts > Rate Manager, select Rates, then Rate Types, and check the No Discount Allowed column.
- If the Rate Type should allow discounts, open it, untick No Discount Allowed, then select Save/Exit. Otherwise, use a Rate Type that allows discounts.
Cause 3: The Rate Period does not allow discounts
A Rate Period with No Discount Allowed selected stops discounts on the nights it covers. If every night of the stay is in such a Rate Period, the list of Discounts is empty. If only some nights are, you can select a Discount, but it takes nothing off those nights: a $20-a-night Discount on a 3-night stay takes off $20, not $60, when two of the nights are in such a Rate Period.
Fix:
- Go to Charts > Rate Manager, select Rates, then Rate Periods, and check the No Discount Allowed column for the Rate Periods that cover the stay.
- If a Rate Period should allow discounts, open it, untick No Discount Allowed, then select Save/Exit.
Cause 4: The stay is shorter than the Discount's minimum nights
Every Discount Type, including BOGO, can have a minimum and a maximum number of nights. On the Reservation screen, RMS leaves a Discount whose minimum is longer than the stay out of the list of Discounts, with no message. It appears once the stay is long enough.
Fix: go to Setup > Accounting > Discounts, select Edit on the Discount, and check the nights in "Discount will only be applied to Reservations which have a minimum of ... Nights Stay" on the Discount tab. Correct the values if they are wrong, then select Save/Exit.
Cause 5: The user's Security Profile has no access to the Discount
The Discounts tab of each Security Profile lists the Discounts its users can access. A Discount in the No Access list is not available to users with that profile, while users with other profiles can still select it. See Restrict User Access to Discounts.
Fix:
- Go to Setup > Users > Security Profiles and select Edit on the user's Security Profile.
- On the Discounts tab, move the Discount from No Access to Access Allowed, then select Save/Exit.
Tip! Ask the user to log out of RMS and log back in, so that the Discount appears for them.
Cause 6: The Discount is inactive
An inactive Discount is not applied on the Reservation screen, even when it is linked to a Rate Type. Quick Quote shows a Discount of 0.00 for the rate, and the reservation's Discount field stays empty.
Fix: go to Setup > Accounting > Discounts and change the list filter from Active to Expired and InActive. If the Discount is listed, select Edit, turn on the Active toggle, then select Save/Exit. The Discount moves back to the Active list.
Cause 7: The Discount Type calculates differently than you expected
Each Discount Type has its own rules for the amount:
- Flat Amount: with Nightly Rate, the amount comes off every night the Discount is valid, so $20 off a 3-night stay takes off $60. With Total Rate, it comes off once for the stay. See Flat Amount Discount.
- Percentage with No Greater Than: the cap applies to the total Discount for the stay, not to each night.
- Children & Infants Stay Free: if Include in base is ticked on the child or infant Additional in the Rate Table, those guests are part of the base rate and the Discount has nothing to take off. See Children & Infants Stay Free Discount.
Promo codes on the RMS Booking Engine
On the RMS Booking Engine, a promo code is the Discount Name of a Discount. If a guest's promo code is not accepted or takes nothing off, check the following:
- The Promo Code field is shown: in Setup > Online Bookings > Online Options, on the Page Settings tab, Show Promotion Code is ticked for the property. See Set up a promo code on the Booking Engine.
- The Discount can be used online: it is active, Use as RMS Online Promotion is ticked, and the stay meets its minimum and maximum nights, Validation Options and channel settings.
- No Automatic Discount is in the cart: a guest cannot use a promo code on a booking that already has an Automatic Discount. See Automatic Discounts and the new RMS Booking Engine.
- The guest is not signed in as a member: while a guest is signed in, the Promo Code field is greyed out.
- The code was entered before choosing a room: guests enter it in the search bar. Rooms already in the cart keep the Discount they were added with, so remove the room and add it again.
Upper and lower case both work for a Discount Name. When more than one Discount could apply to a room, see Discount Hierarchy for the RMS Booking Engine.
Still Not Working?
If the Discount still does not apply, contact RMS Support and include the reservation number, the Discount name, the Rate Type, the stay dates and any message RMS shows.
Related Articles
- Add a Discount to a Reservation
- Available Discount Types
- Troubleshooting: Reservation Rate Is Different to the Rate Manager
- Troubleshooting: A Rate Type Is Missing or Cannot Be Selected
Comments
0 comments
Please sign in to leave a comment.